HFA1405 Datasheet

• Low Supply Current 5.8mA/Op Amp
• High Input Impedance 1M?
• Wide -3dB Bandwidth (AV = +2) 560MHz
• Very Fast Slew Rate 2500V/?s
• Gain Flatness (to 50MHz) ?0.03dB
• Differential Gain 0.02%
• Differential Phase 0.03 Degrees
• All Hostile Crosstalk (5MHz) -60dB
• Pin Compatible Upgrade to HA5025, CLC414, and CLC415

• Low Supply Current 5.8mA/Op Amp
• High Input Impedance 1MΩ
• Wide -3dB Bandwidth (AV = +2) 560MHz
• Very Fast Slew Rate 2500V/µs
• Gain Flatness (to 50MHz) ±0.03dB
• Differential Gain 0.02%
• Differential Phase 0.03 Degrees
• All Hostile Crosstalk (5MHz) -60dB
• Pin Compatible Upgrade to HA5025, CLC414, and CLC415

The HFA1405 is a quad, high speed, low power current feedback amplifier built with Intersil's proprietary complementary bipolar UHF-1 process.

These amplifiers deliver up to 560MHz bandwidth and 2500V/µs slew rate, on only 58mW of quiescent power. They are specifically designed to meet the performance, power, and cost requirements of high volume video applications. The excellent gain flatness and differential gain/phase performance make these amplifiers well suited for component or composite video applications. Video performance is maintained even when driving a back terminated cable (RL = 150Ω), and degrades only slightly when driving two back terminated cables (RL = 75Ω). RGB applications will benefit from the high slew rates, and high full power bandwidth.

The HFA1405 is a pin compatible, low power, high performance upgrade for the popular Intersil HA5025, and for the CLC414 and CLC415.